What Is The Measurement Of Melt Flow Index?
Melt Flow Index (MFI) is an important parameter to measure the fluidity of plastic materials under certain conditions. The MFI is measured by means of a specialised MFI meter. This is done by placing a certain amount of polymer into a cylinder and allowing it to melt completely at a specified temperature. Afterwards, the molten polymer flows out of a small fixed diameter hole in the bottom of the barrel under a standard load. Typically, the weight (in grams) of the polymer that flows out in 10 minutes is used to express its melt index. This value reflects the fluidity of the material, i.e. how quickly or slowly it flows under certain conditions.
The melt index is a key parameter in the production and application of Solar eva film. It is not only related to the processing performance of the film, but also directly affects the adhesive strength of the film and the final product performance. Therefore, accurate determination and control of the melt index of EVA adhesive film is crucial to ensure the quality and performance of photovoltaic modules.
In Solar eva film, how does the melt index affect its bond strength and performance?
Fluidity: Higher melt index EVA adhesive film has better fluidity, which makes the film in the lamination process can be better lay flat, the formation of more physical bonding points, thus improving the peel strength. This is very important to ensure the structural stability and long-term performance of PV modules.
Bonding performance: However, when the melt index is too large, it may lead to a reduction in the polymerisation of EVA, which means that the adhesive film's own strength will be weakened, instead of making the bonding force decline. Therefore, a balance needs to be found in production to ensure that the adhesive film has good fluidity without sacrificing its own strength.
Zanchen New Material
What is Solar eva film?
Solar eva film is a core encapsulation material used in solar photovoltaic (PV) modules, which protects and secures the cells. The following is some key information about Solar eva film:
1, Role and importance: Solar eva film is mainly used to bond PV glass, cells and backsheets together, and at the same time protects the cells from external environmental influences, such as moisture and mechanical damage. It also has light transmittance, which can maximise the sunlight through to reach the cell, thus enhancing the power generation efficiency of the PV module.
2, Material type: Solar eva film mainly has EVA (ethylene vinyl acetate copolymer) and POE (thermoplastic polyurethane) two kinds of materials, EVA film is a kind of widely used traditional materials, and POE film is gradually favoured because of its better water vapour barrier rate and weathering performance.
3, The development of technology: with the development of technology, the emergence of an EPE film, that is, "EVA-POE-EVA" three-layer composite structure of the film. This co-extruded POE film combines POE's high water resistance and high resistance to PID (Potential Induced Degradation) performance and EVA in the double-glass components in the lamination process advantages, suitable for PERC double-sided double-glass, N-type double-sided double-glass, as well as other weathering requirements of the PV module package.
4, Market demand: with the acceleration of the global decarbonisation trend, the photovoltaic industry as an important part of renewable energy, its market demand continues to grow, Solar eva film as a key material for photovoltaic modules, its market demand has also increased.
In summary, Solar eva film plays a vital role in the production and application of PV modules, not only related to the performance and efficiency of the components, but also affects the reliability and life of PV modules.